Skip to content
English
  • There are no suggestions because the search field is empty.

How to Set Up Two-Factor Authentication (2FA)

Add a code from an authenticator app to your BuyerBridge login.

Two-factor authentication (2FA) adds a second check to your BuyerBridge login: a 6-digit code from an authenticator app on your phone. Agencies can require it for every login on their team.

Quick Links

Before You Start

Install an authenticator app on your phone or tablet. BuyerBridge works with any of these:

2FA settings are for agency logins. Users with the Client role don't see them.

Turn On 2FA

  1. Log in at app.buyerbridge.io/login.
  2. Click your profile in the top right corner, then click Settings.
  3. In the Security section, flip the Two-Factor Authentication switch on.

The Security section of BuyerBridge Settings with the Two-Factor Authentication switch turned off

The Enable two-factor authentication page opens with three steps:

  1. Get the app. Skip this if your authenticator app is already installed.
  2. Scan this barcode. In your authenticator app, tap the + icon in the top right, then scan the barcode on screen with your phone's camera.
  3. Enter verification code. Type the 6-digit code your app shows into the Code field and click Verify code.

The Enable two-factor authentication page showing Step 1 Get the app, Step 2 Scan this barcode and Step 3 Enter verification code with the Code field and Verify code button

You'll see "Your two-factor authentication is set up." Back in Settings, the Security section now reads "2FA is enabled on your account."

Log In With 2FA

When your agency requires 2FA, logging in takes one more step:

  1. Enter your email and password at app.buyerbridge.io/login and click Login.
  2. On the Two-factor challenge screen, open your authenticator app and type the current 6-digit BuyerBridge code into Authentication code.
  3. On your own computer? Tick Skip Two-Factor Authentication on this device for 14 days so you aren't asked again for two weeks. Leave it unticked on shared computers.
  4. Click Verify code.

The Two-factor challenge screen with the Authentication code field, the Skip Two-Factor Authentication on this device for 14 days box and the Verify code button

When Your Agency Requires 2FA

The BuyerBridge team can make 2FA required for everyone at your agency. Once it's on, every agency login goes through the Two-factor challenge screen above.

Anyone who hasn't set up 2FA yet lands on the Enable two-factor authentication page right after entering their password. They finish the three steps above, then they're in.

To require 2FA for your agency, email support@buyerbridge.com.

Turn Off 2FA

  1. Go to your profile > Settings.
  2. Flip the Two-Factor Authentication switch off.
  3. In the Disable Two-Factor Authentication? box, click Yes, disable 2FA.

You can turn it back on from the same switch any time.

Troubleshooting

My code doesn't work. Codes change every few seconds. Type the one your app shows right now, and check that your phone's clock is set automatically.

I can't scan the barcode. Click Can't scan this barcode? under Step 2 for help entering the key by hand.

I lost or replaced my phone. Email support@buyerbridge.com to get back into your account.

Continue Learning